Blog :: 01-2021

Carpet Removal Made Simple

Do you have carpet that is old, with multiple stains and has collected the grime from city streets?  Are you ready for a change to wood flooring in one of the rooms in your condo or maybe the whole thing? It starts with ripping up the carpet, and you can save money by doing it yourself.

Here is a list of tools that you will need:
1.  Utility knife
2.  Vice grips or channel locks
3.  Crowbar or catspaw
4.  Dust mask
5.  Wood chisel 
6.  Hammer

Start by selecting an edge or a corner and use vice grips or channel locks to pull until the carpet is free from the underlayment (sponge-like material installed underneath the carpet). While using your dust mask, distribute your weight from your legs to your upper body and rip up a section of the carpet. From there, use a utility knife to cut the carpet into manageable pieces (recommend cutting every 4-6ft.) to facilitate an expedited and safe removal from your home. Once all the carpet is removed, there will remain underlayment. The underlayment will be stapled to the plywood substrate. The underlayment usually will not rip up clean, but in pieces. Try your best to pull carefully around the staples so the underlayment comes up in full sections. Use a wood chisel and channel locks to remove the staples that remain in the ply-wood. If some of the staples cannot be removed, use a hammer to embed the staples into the plywood. Once all underlayment is free, you will be left with a substrate ready to receive your new floor.

 

Comments

  1. No comments. Be the first to comment.